Manor 1 Pack Etch Primer CT is a single pack etch primer for improving adhesion on non-ferrous metals, suitable for use on many metals, particularly steel, galvanised steel, zintec and aluminium. If used on steel when an automotive finish is required in terms of adhesion and corrosion resistance, it should then be overcoated with a standard primer, undercoat and topcoat.
May be used as a weld through holding primer
In black it is often used as a primer/finish on items used internally
Can be overcoated with a wide range of single and two pack topcoats or powder coating
Typical film thickness: 10-15 microns
Theoretical coverage: 12m2 per litre at 12 micons dry film thickness
Touch dry (20°C): 10 minutes
Recoat (20°C): 1 hour minimum, 8 hours maximum
Must be overcoated the same day with the appropriate primer or topcoat. If 1 Pack Etch Primer CT has to be left for more than 24 hours before recoating, lightly abrade film to improve intercoat adhesion.