Primer, Stabiliser, & Water Sealer

Cromar Waterseal is a clear water proofing treatment for porous exterior surfaces such as brickwork and timber.

Exterior Water Seal is a clear high performance
waterproof treatment for exterior porous surfaces.
For use on brickwork, concrete, stone, paving,
asbestos and cement. It can also be used to
repel water on exterior wood that has previously
been treated with a preservative.

Path & Patio Seal is a solvent free acrylic coating used to seal and protect patios, paths, natural stone, concrete and block paving from the effects of sunlight, water, oil, petrol and fungal/moss growth. The milky solution dries to a clear hard-wearing, water repellent film giving a low sheen slip resistant finish.

Stabilising Solution Clear binds down chalky, underbound exterior masonry surfaces prior to the application of Truguard water-borne masonry coatings.

Drying Time
Touch dry in 1-2 hours. Recoatable after 16-24 hours.
Coverage
Approximately 6 square metres per litre.
Pack Size
Available in 2.5L & 5L.
Application
Brush only.

Brick & Patio Cleaner is a fast acting acid based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, paving flags and earthenware.

Leyland Alkali Resisting Primer is a solvent-borne, alkali resisting primer for masonry surfaces that promotes first class adhesion. Also suitable for use on other surfaces including wood and fibreglass. Drying Time
Touch dry in 4-6 hours. Recoatable after 16-24 hours.
Coverage
Approximately 10 square
metres per litre.
Pack Size
Available in 2.5L and 5L sizes.
Application
Brush, conventional spray or airless spray.

Zinsser Gardz is a unique water-based sealer for porous and potential problem surfaces. Gardz is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.

Repairs torn paper on damaged drywall, eliminates bubbles
Seals skim coats & spackling
Protects new drywall
Seals old wallpaper adhesive
Easy to apply, high spread rate, fast drying
Water-base, low odor, dries clear

PVA Bond is a multi-purpose bonding agent, primer, sealer, cement and plaster admixture that adheres to most common building and DIY materials. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc and as a cement and plaster admixture. Fully conforms to BS 5270.